Underbody Sealant Spray Gun Aust

The 206.A Underbody Sealant Spray Gun for use with Australian Short Cans
Features adjustable spray pattern. The guns comes with special flexible nylon hose for inner spaces where rust proof products are used. Air consumption: 5.3 cfm @ 85 psi.

NB: Do not use nylon hose for body schutz.

Underbody Sealant Spray Gun Euro

The 206.E Underbody Sealant Spray Gun for use with European Long Type Cans
Features adjustable spray pattern. The guns comes with special flexible nylon hose for inner spaces where rust proof products are used. Air consumption: 5.3 cfm @ 85 psi.

NB: Do not use nylon hose for body schutz.

Air Gunsa Refillable Underbody Spray Gun

The AZPVA Air Gunsa refillable underbody spray gun is a high quality, heavy duty spray gun, with internal mix and suction feed.
The gun is suitable for the application of underbody coatings and dense material. Comes with adjustable round spray nozzle and a refillable 1 litre aluminium container.

Pressurised Underbody Spray Gun

• The A215 Pressurised Underbody Spray Gun and Kit 215 Nozzle Set are used for the professional application of antirust and underseal coating agents.
• The pressurised container assures consistent spraying of different materials, from fish oil, waxes to underbody “proofcoat”. Cup capacity is 1.5 litres. Air consumption: 8 cfm @ 80 psi. Air pressure at gun inlet: 4-8 bar (60 -112 psi)
• The Kit 215S Extension nozzle set includes: a 6 mm x 1000 mm nylon hose, with blend nozzle producing a fan shaped pattern; nylon hose (6 mm x 1000 mm) with a 360 atomising nozzle; brass tube (7 mm x 760 mm) with a 360 atomising nozzle.
• A215: Anti-rust Pressure Gun & Pot
• A215S: Anti-rust Pressure Gun & Extention Nozzles
• BH098336: A215 Nozzle Set
• BH098338: Service Kit A215

Texture Spray Gun

Ideal for spraying pavements and walls as the nozzle swivels to point down or straight ahead. Sprays mortar and texture type materials up to medium viscosity.
This unit comes standard with three fluid nozzle sizes for spraying materials with small to coarse particle size. The MG.2D also comes with material shut off valve.
Sprays mortar and texture coatings

Plaster Spray Gun

The MG.3C is ideal for spraying plaster and high viscosity materials. The three fluid nozzles allow spraying of materials with medium to coarse particle size.

Mortar Spray Gun

The MG.6B multi purpose spray gun has 13 kinds of standard nozzles.
With three air nozzles and 10 fluid nozzles to choose from, this spray gun is ideal for spraying a wide range of materials, such as texture, mortar, stucco and plaster. This also allows spraying of materials with small to coarse particles and materials of high or low viscosity.
Sprays mortar, texture, stucco and plaster.

Sand Blasting Gun With 1 Litre Cup

• The ST1 sandblasting gun with container is ideal for small jobs
• Treated steel inner fluid nozzle
• Treated steel (highly resistant to wear) outer fluid nozzle (extension type, adjustable)
• Total weight - 780 g
• Air consumption - 308 l/min (10.8 cfm)
• Fluid nozzle diameter - 5 mm
• One litre capacity container

• 2030640300: ST1 Replacement Nozzle Nozzle Kit 5mm

Spare Parts Guide

Sand Blasting Gun

• The ST self-priming sandblasting gun is ideal for large areas
• Treated steel inner fluid nozzle
• Treated steel (highly resistant to wear) outer fluid nozzle
• Total weight - 1020 g
• Air consumption - 315 l/min (11 cfm)
• Fluid nozzle diameter - 6 mm
• Sand suction hose length - 1.5 m

• 2030520160: St Replacement Nozzle Kit 6mm

Spare Parts Guide

ANI Aluminium Heavy Duty Kero Cleaning Gun

• The 26.B Aluminium Kero Cleaning Gun comes with a built-in air regulator.

Air Gunsa Heavy Duty Kero Cleaning Guns

• The P6 Air Gunsa Kero Heavy Duty Cleaning Spray Gun is a high quality spray gun with a 260 mm fluid nozzle extension.
• Air requirement: 9 cfm.
• Weighs: 950 g
• The spray gun sprays kero, oil, petroleum and detergents.
• Suitable for washing and lubricating operations.
• Features a concentrated round spray with adjustable fluid nozzle.

Air Gunsa Heavy Duty Kero Cleaning Guns 500mm extention

• The PL6 Air Gunsa Kero Cleaning Spray Gun is similar to the P6, but features a 500 mm nozzle extension.

Cleaning Gun (replacing the 25.B ANI Kero Cleaning Gun)

• Constructed from corrosion resistant steel and features a 1000cc Cup Capacity.

Air Duster Gun

• The Ideal air duster for cleaning any kind of machinery and equipment. Features Brass inserts, 100mm nozzle, progressive opening trigger and is made from lightweight polyacetal

Metal Art Duster (replacing the 25A2 & 25BE)

• Similar to the PS110, but features 3 nozzle lengths (26mm, 110mm, 217mm) and is made from Aluminium

Air Duster

• Similar to the PS110, but features 3 nozzle lengths (26mm, 110mm, 217mm) and is made from Aluminium

Aqua Dry Blow Gun

• The stand has a slide and lock height adjustment.
• The gun brackets can be moved along the length of the arm and positioned to suit.
• Each arm can be used independently
• The guns are provided with quick couplings which allow fast disassembling
• Guns are easily adjustable
• Venturi air entrainment increases air flow by 6:1
• The guns are provided with quick couplings which allow fast disassembly
• Air regulator included
• Guns are easily orientable
• The stand has a slide and lock height adjustment. The gun brackets can be moved along the length of the arm and positioned to suit.
• The height of stand is 180 cm
• The width of arm is 80 cm (38,5 each side), and it stands 2 aquadry guns
• Variable airflow
• Max pressure: 7 bar
• Max air consumption: 2 x 600 l/min

User Manual