Lubricants & Storage Solutions

Throat Seal Oil

Used in the wet cup of a piston pump, to stop paint (that might leak from the upper packing) from drying on the piston and causing damage to the upper packing. Use with all piston pumps.

Product Codes:
188.187: Throat Seal Oil 6 oz (168 ml) Bottle.

 

Quick Flush System

The only clean water flushing system; cuts clean up time of airless sprayers. Connects to standard garden hose to backflush water based paint through gun and hose.

Product Codes:
170.005: Quick Flush System.

 

Pump Saver

A water based storage solution for short term storage - one to two weeks. Blue in colour and biodegradable.

Product Codes:
010.009: Pump Saver 1 quart bottle (946mL).
010.001: Pump Saver 1 oz Bottle (28 ml) x 48 in display box.

 

MagiCLEAN Cleaning Solution

Safely Removes Paint & Overspray from Paint Sprayers, Hose & Spray Guns

Put your paint covered parts in the steel tray, let them soak in the MagiCLEAN starter kit bucket. Most of the paint will flake off and settle in the residue tray at the bottom of the bucket for future disposal. Some types of paint will require a wire brush to knock it off.
Begin by ordering a starter kit and you will have everything needed for a complete paint removal system. MagiCLEAN parts cleaning liquid can be reused again and again. Purchase refill bottles as needed to replenish the material removed during the cleaning process.

Product Codes:

100.658: MagiCLEAN Starter Kit3 Gallons (11.36 L) of MagiCLEAN in a 5 gallon (18.93 L) bucket with removable plastic paint residue tray and steel parts cleaning basket.
100.659: MagiCLEAN Refill Bottle2.5 Gallons of MagiCLEAN in a plastic bottle.
100.666:MagiCLEAN Mini Cleaner Pk 1212 x 237mL of MagiCLEAN in a counter display stand.
100.666.1:MagiCLEAN Mini Cleaner(Single)237mL

 

Airless Pump Filters

Strainer Bags
Used in the paint bucket or tied to the suction pickup tube to pre-filter paint

100.064: Spray Sock, used to cover suction filter. Pkt 12
100.065: Strainer 20 Litre Pkt 12

High Pressure Filter
Used between the pump and the gun to keep smaller particles from blocking tip

111.200.99: Filter assembly with fittings - Airlessco pumps
111.20460: Mesh filter screen fits PN 111.200.99
188.087: Rock Stain Old SL unit

Filters

UF000100: Filter Only PF20 ALS 333 / 433
TF8: Filter Assembly PF20 ALS333 / 433
94569670: Filter Element 100 Mesh for TF8 Pkt2

Suction Filters
Used at the end of the suction tube or pickup tube of the pump

331.217: Suction Filter 3/4-16 LP Units
141.008: Suction Filter 3/4 3100 / LP690 unit
141.010: Suction Filter 1" SL units
MP2153: Suction Filter CH Unit Pkt 2

Airless Repair Kits & Valves

189.211: Packing Nut Adjusting Rod LP/SL units
111.014: High Pressure Test Gauges only 1/4" NPT
111.045: Test Gauge Assemble with 1/4" fittings - Used between pump and hose
100.180: Prime/Pressure Relief Valve LP/SL Units

Repair Kits

120.534: Repair kit for 008 silver and Prolight guns
KIT.2.007: 007 Airless Gun Repair Kit - Basic

Packing Kits

331.210: LP Units Packing Kits
KIT.3.007: 007 Airless Gun Repair Kit - Complete
187.040: SL Units Packing Kits
KPA33OR: V Packing Kit ALS 333
KPA43OR: V Packing Kit ALS 433
KPA33ST: Fluid Pump Maintenance Kit ALS33
KPA43ST: Fluid Pump Maintenance Kit ALS433

Re Service Kits

ALS333.RSK: Service Kit Air Motor ALS333
ALS433.RSK: Service Kit Air Motor ALS433

Sure Stripe Linemarker Accessories

136.069: Line Pointer
305.176: 2 Gun Kit 3300 / 4500
305.175: Bead Dispenser 2 Gun Kit